Standard BNQ 3624-050 Unplasticized Poly(Vinyl Chloride) [PVC-U] Perforated Pipe and Fittings - Pipes of 150 mm in Diameter or Smaller for Underground Dispersion of Effluents
Standard BNQ 3624-050 sets out the requirements relating to the dimensions, properties and testing methods for perforated pipe and its rigid fittings, manufactured from PVC compositions and used in gravity flow subsurface effluent disposal. It applies to rigid, smooth interior and exterior wall pipe and fittings, equipped with sockets for glued assembly. More specifically, it deals with rigid pipe and fittings used for the treatment of effluent from septic tanks by soil infiltration.
Download standard
11167
ANG
BNQ 3624-050
Unplasticized Poly(Vinyl Chloride) [PVC-U] Perforated Pipe and Fittings - Pipes of 150 mm in Diameter or Smaller for Underground Dispersion of Effluents
This new edition supersedes the edition dated June 16, 1997.
Tuyaux perforés et raccords en poly(chlorure de vinyle) non plastifié (PVC-U) - Tuyaux d'un diamètre inférieur ou égal à 150 mm pour la dispersion souterraine des effluents
Cette nouvelle édition remplace celle du 16 juin 1997.
MDDELCC - Direction générale des politiques de l'eau - Direction des eaux municipales
Mr. Stéphane Bergeron
Association des ingénieurs municipaux du Québec (AIMQ)
Mr. Jean-Yves Caron
Les plastiques Abénaki inc.
Mr. Alain Caza
Groupe Béton Brunet ltée
Mr. Claude Couillard
Ville de Québec
Mr. Jean Gingras
Corporation des officiers municipaux et en environnement du Québec (COMBEQ)
Mr. Daniel Grenier
Centre de recherche industrielle du Québec (CRIQ)
Mr. Alain Leroux
IPEX Gestion inc.
Mr. Marc-Antoine Loranger
Ministère des Transports, de la Mobilité durable et de l'Électrification des transports (MTMDET)
Ms. Rowena Patenaude
Royal produits de bâtiment
Mr. Jacques Pharand
Ville de Montréal
Mr. Jacques St-Denis
Services d'essais Intertek ltée
Mr. Christian Vézina
NORDIKeau
Certification Offer
Manufacturers may ask the BNQ to recognize the conformance of their pipes and fittings with BNQ 3624-050. To obtain certification of their products, the manufacturers must prove they comply with the standard’s requirements.
General requirements:
Requirements related to thermoplastic (PVC)
General characteristics of the pipes and fittings
Assembly
Special requirements:
Dimensional characteristics, including the location and dimensions of the perforations
Mechanical characteristics (rigidity, crush and shock resistance, quality of fusion bonding of co-extruded multiple smooth wall pipes)
Chemical resistance
Solar radiation protection
Verification of the PVC extrusion quality of the pipes
Verification of the moulding quality of PVC fittings
Marking and handling
This certification program is accredited by the Standards Council of Canada.
Daniel Gagnon, Eng. Program Leader Bureau de normalisation du Québec Tel.: 418-652-2230 / 1-800-386-5114, ext. 2230
This email address is being protected from spambots. You need JavaScript enabled to view it.
